From faucet repairs to full bathroom plumbing, we handle fixtures, remodel rough-ins, and code-compliant installations. Get upfront pricing, clean workmanship, and expert solutions for bathrooms in older Harrisburg homes.
Whatever the fixture or the project, we cover the plumbing side of your bathroom.
Toilets, hidden leaks, and stubborn drain clogs have their own dedicated pages, our toilet repair and installation, leak detection, and drain cleaning services cover those in depth, and we handle them on the same visit when they come up.
A dripping faucet is the most common bathroom call we get, and one of the cheapest to ignore at your own expense, a steady drip wastes water all day. Most are a worn cartridge, washer, or O-ring, an easy fix once we open it up. We also replace faucets entirely, install new vanity sinks, and swap the corroded supply lines and shutoff valves that often come with an older fixture. If you are putting in a new vanity, we handle the drain, trap, and supply connections so it drains and seals right the first time.
Showers and tubs hide most of their plumbing behind the wall, which is why a problem here is best left to a plumber rather than guesswork. We install and plumb new tubs and shower pans, replace spouts and trim, and trace leaks that show up as a stain on a ceiling below or a soft spot in the wall. For a tub-to-shower conversion or a new shower in a remodel, we handle the valve, drain, and supply work behind the surface so the finished job performs and does not leak.
A shower that drips after you shut it off, will not hold a steady temperature, or scalds when someone runs a faucet elsewhere usually has a worn or failing shower valve, the mixing cartridge behind the handle. We replace the cartridge or the valve, and on older homes we can upgrade to a pressure-balancing valve that keeps the temperature steady when other water is running. Because the valve sits behind the wall, doing this right, with proper access and a clean reseal, is what separates a lasting fix from a callback.
Weak pressure at a bathroom faucet or shower has a few common causes. If it is just one fixture, it is often a clogged aerator or showerhead, mineral buildup from the area's moderately hard water, which we clean or replace. If pressure is weak throughout the bathroom or the whole house, the cause is more often old galvanized supply pipe rusting shut from the inside, a frequent issue in Harrisburg homes built before 1950. We test the pressure, find whether it is one fixture or the supply line, and tell you straight which fix you actually need.
A bathroom remodel lives or dies on the plumbing behind the walls, and that is the part you want done before the tile goes up. We handle the rough-in for renovations, relocating or adding supply and drain lines, moving a sink or tub, setting the shower valve, and venting it correctly, then return for the final fixture connections once the surfaces are in. We coordinate around your contractor's schedule and pull the permits the plumbing work requires, so the inspection passes and the finished bathroom holds up. For landlords and flips, that means code-compliant work and the paperwork handled.
Whether it is a single faucet or a full remodel rough-in, you get one local plumber and one flat price.
We confirm a window and ask what the bathroom needs, a repair, a new fixture, or remodel plumbing.
For a repair we find the real cause; for an install or remodel we confirm what the rough-in and connections require.
In writing before any work starts, with no hidden costs.
Repair or install to code, with the corroded shutoffs and supply lines an older home often needs addressed along the way.
Confirm everything drains and seals with no leaks, and leave the bathroom tidy.
Cost depends on the work, a faucet repair is a small job, while a shower valve replacement or remodel rough-in runs more and varies by the project. We give a flat price in writing before we start, and on an older home we will flag any corroded shutoff or supply line that needs replacing up front, not after. The table below shows typical ranges so you know what to expect.
| Service | Typical cost in the Harrisburg area |
|---|---|
| Bathroom faucet or fixture repair | $150 to $400 |
| Faucet or fixture installation | $150 to $600 |
| Shower valve or mixer replacement | $250 to $600 |
| Sink, tub, or shower drain clearing | $100 to $460 |
| Toilet repair or installation | $100 to $800 |
| Bathroom remodel plumbing (rough-in) | Quoted per project |
These are typical ranges, not quotes. Your final price depends on the fixture, the work, and what an older home turns up behind the wall, and we put it in writing before any work starts. Remodel rough-in is quoted per project once we see the scope.
Want a clear price first? Call (717) 500-8923.
We handle bathroom plumbing across Harrisburg and the towns around it, the same day in most cases for repairs.
We cover Dauphin County ZIP codes from 17101 through 17113 and more. Not sure if we reach you? Just call and ask.
A faucet or fixture repair typically runs about 150 to 400 dollars, a fixture installation about 150 to 600 dollars, and a shower valve replacement about 250 to 600 dollars. Remodel rough-in is quoted per project. We give a flat price in writing before we start.
Almost always a worn cartridge, washer, or O-ring inside the faucet. It is an inexpensive repair, and worth doing soon since a steady drip wastes water all day. We can repair the faucet or replace it if it is older.
That is a worn shower valve, or an older valve without pressure balancing. We replace the cartridge or upgrade to a pressure-balancing valve that holds a steady temperature even when another fixture runs.
If it is one fixture, it is usually a clogged aerator or showerhead from mineral buildup. If it is the whole bathroom or house, it is often old galvanized pipe rusting shut, common in older Harrisburg homes. We test and tell you which it is.
Yes. We handle the rough-in, supply and drain lines, moving fixtures, setting the shower valve, and venting, then return for final connections after surfaces are in. We coordinate with your contractor and pull the permits the work needs.
Yes. We plumb and install new tubs, shower pans, and fixtures, whether you supply them or have us provide them, and handle the valve, drain, and supply work behind the wall.
Yes. A slow bathroom drain is usually hair and soap in the trap or line. We clear it properly rather than relying on chemicals that damage older pipe. If a drain clogs repeatedly, that points to a deeper issue we can camera.
Yes, and in older homes we often need to. Seized or corroded shutoffs are common under aging fixtures, and we replace them so the fixture can be serviced safely now and in the future.
Yes. We work with landlords and property managers on repairs, fixture installs, and code-compliant remodel work, and can coordinate access with tenants and provide written reports.
In most cases, yes, for repairs and many fixture installs. We carry common parts on the truck. Remodel rough-in is scheduled around the project, but repairs are usually handled in one visit, even on weekends and holidays.
Have a different question? See all our plumbing FAQs.